Want to unlock more performance from your GT73 Pro electric bike by Riding Times? If you’ve been searching for a simple GT73 Pro speed limit unlock method, you’re in the right place. In this step‑by‑step guide, we’ll show you exactly how to remove the factory speed limit and access more of your bike’s true potential.
Many riders feel stuck because their GT73 Pro seems capable of more, but the factory setting limits the top speed. Many hit the limiter and never realize they can easily change it. With the correct GT73 Pro speed limit unlock process, you can let your bike perform closer to its designed capability.
The same basic steps also apply to the GT73 PRO, GT54, and GT54 PRO, so this guide works for multiple Riding Times models. Before you start, keep in mind that your actual top speed will depend on rider weight, road slope, wind, tire pressure, battery level, and riding mode. Even after a GT73 Pro speed limit unlock, hitting 50 mph is not guaranteed for every rider or every road.
Why riders search for a GT73 Pro speed limit unlock
More and more people are using their GT73 Pro for performance‑oriented riding, not just commuting. They want faster acceleration, better hill climbing, and a more exciting ride on open roads or private land. That’s why the GT73 Pro speed limit unlock has become one of the most‑searched topics for Riding Times owners.
Some riders buy the GT73 Pro expecting a powerful e‑bike, only to find that the factory software keeps the speed in check. Others see higher speeds shown in videos and wonder, “Why can’t I reach that?” Often, the answer is a simple setting that can be changed with the GT73 Pro speed limit unlock.
If you’ve been stuck with this limiter and are looking for a way to remove it, this guide will get you through the process safely and clearly.
What you should know before the GT73 Pro speed limit unlock
Before you touch any settings, it helps to understand a few key points:
- The GT73 Pro speed limit unlock removes a software restriction, but it does not change the bike’s mechanical limits.
- Your real‑world top speed depends on rider weight, road slope, wind, and tire pressure.
- Battery level and assist mode can also affect how fast the bike feels.
- Safety and legality matter: high‑speed riding requires good brakes, alertness, and awareness of local laws.
In short, a GT73 Pro speed limit unlock makes the bike feel more powerful, but performance will still vary with conditions. If you’re not reaching 50 mph right away, it may be because of the road, not the setting.
How to perform the GT73 Pro speed limit unlock
This is the core process for removing the factory speed limiter on your GT73 Pro (and compatible models like GT73 PRO, GT54, and GT54 PRO).
Step 1: Enter the settings menu
Turn on the bike and spin the wheel or pedal slightly to wake the display. Then:
- Press and hold both the “+” and “–” buttons at the same time to enter the settings menu.
- You should see P01 on the screen.
This is the first step in the GT73 Pro speed limit unlock and opens the configuration area where you can adjust the limiter setting.
Step 2: Remove the speed limit
- Tap the “+” button until the screen shows “1.”
- A value of 1 means the speed limit is removed.
This is the key part of the GT73 Pro speed limit unlock. When the setting is changed, the bike will no longer be restricted in the same way as before.
Step 3: Save and exit
- Press and hold the “+” and “–” buttons together again to save the setting and exit the menu.
That’s it. Your GT73 Pro speed limit unlock is now complete. The bike should behave differently at higher speeds, especially on flat, open roads.
Why do some riders not reach max speed after the unlock
A common comment from riders is: “I did the GT73 Pro speed limit unlock, but I still don’t see the top speed I expected.” This usually happens because speed is affected by several factors at once.
Here are the main reasons riders may not hit the highest numbers:
- Rider weight is higher, which increases resistance and affects acceleration.
- The road has an incline or slope, so the motor is working harder to climb rather than go faster horizontally.
- Tire pressure is too low, adding drag and reducing efficiency.
- The battery is not fully charged, limiting peak power output.
- Wind resistance or rough surfaces reduce speed at higher velocities.
- Riding mode or assist level can cap how much the motor delivers at any given moment.
So if you’re not reaching 50 mph after a GT73 Pro speed limit unlock, it does not mean the setting failed. It often means the bike is doing its job under real‑world conditions. In many cases, ideal conditions are needed to see the bike’s true top speed.
Best riding conditions for higher speed
If you want to get the most out of your GT73 Pro speed limit unlock, try these riding conditions:
- Flat, open roads or private areas where you can safely accelerate.
- Proper tire pressure is inflated to the recommended range on the sidewall.
- Full battery charge so the motor can deliver maximum power.
- Lighter load on the bike (less extra gear or passenger weight if applicable).
- Low wind and smooth surfaces to reduce drag and rolling resistance.
- Appropriate riding mode that matches your desired speed and performance.
When you combine a clean GT73 Pro speed limit unlock with well‑tuned conditions, you’ll notice a much more responsive and powerful ride.
How to switch between km/h and mph
Many riders also want to change the display from km/h to mph (or vice versa) so they can read the speed in their preferred unit. This is a separate setting that does not affect the speed limiter but pairs well with a GT73 Pro speed limit unlock.
Follow these steps:
Step 1: Enter the settings menu
- Press and hold both the “+” and “–” buttons at the same time to enter the settings menu.
- You should see P01 on the screen.
Step 2: Go to PO2
- Tap the “M” button to enter PO2.
Step 3: Change the unit value
- Tap the “+” button to change the value from 0 to 1 on the screen.
- This switch changes the display unit (for example, from km/h to mph or the reverse, depending on your bike’s default setting).
Step 4: Save and exit
- Press the “+” and “–” buttons together again to save and exit the setting.
- After that, the new unit should be active and visible on the display.
Now you can clearly monitor your speed in the unit you prefer while using your GT73 Pro speed limit unlock setting.
Safety, legality, and responsibility
Even though the GT73 Pro speed limit unlock can unlock more performance, it is important to ride responsibly. Faster speeds demand:
- Better braking and well‑maintained components.
- Full attention to the road and surroundings.
- Proper safety gear (helmet, gloves, eye protection).
- Respect for local laws and speed limits.
Speed unlocking is best suited for private property or areas where high‑speed riding is allowed. Always check what is permitted in your region and avoid riding at excessive speeds on public roads where it could be unsafe or illegal.
Ride smart, ride safe, and enjoy the extra performance your GT73 Pro can deliver.
Need help or official support?
If you run into any issues during the GT73 Pro speed limit unlock, or you want to confirm that your bike is working correctly, you can reach out to official support.
Visit the support center:
Or email:
